Bicycle Gearing & Fit Calc
Rolling circumference and diameter for common tyre sizes, or an estimate from rim bead diameter and tyre width in mm.
The wallet the 402 directs payment to. Its whole payment record — every payer, every chain — is on the merchant page.
Asset 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913
The payTo wallet does not resolve to a registered ERC-8004 agent. That is not a verdict on the service — most of the catalog is unregistered.
Live 402 challenge
Captured by the enrichment pass, not read just now. Prices can change — always read the 402 the endpoint answers with.
{
"error": "Payment required",
"accepts": [
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "base",
"mimeType": "application/json",
"resource": "https://bike-calc.x402tookit.com/wheel-size",
"description": "Rolling circumference and diameter for common tyre sizes, or an estimate from rim bead diameter and tyre width in mm.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"tyre": "700x25c"
}
},
"output": {
"asOf": "2026-10-12T01:50:57.973Z",
"basis": "preset table",
"source": "computed locally (common cyclocomputer table values; estimate = pi x (BSD + 1.92 x width))",
"reasons": [
"Preset values are the common cyclocomputer table figures."
],
"summary": "700x25c: circumference about 2105 mm (diameter 670 mm, 26.38 in).",
"verdict": "PRESET",
"degraded": false,
"diameterMm": 670.04,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"real circumference, which varies with tyre brand, pressure, load and wear (roll the wheel one turn to measure)",
"tubeless sealant or wide-rim effects on tyre profile",
"…1 more"
],
"diameterInches": 26.38,
"circumferenceMm": 2105,
"revolutionsPerKm": 475.1,
"metersPerRevolution": 2.105
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "BFK9TLC3edb13K6v4YyH3DwPb5DSUpkWvb7XnqCL9b4F"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"scheme": "exact",
"network": "solana",
"mimeType": "application/json",
"resource": "https://bike-calc.x402tookit.com/wheel-size",
"description": "Rolling circumference and diameter for common tyre sizes, or an estimate from rim bead diameter and tyre width in mm.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"tyre": "700x25c"
}
},
"output": {
"asOf": "2026-10-12T01:50:57.973Z",
"basis": "preset table",
"source": "computed locally (common cyclocomputer table values; estimate = pi x (BSD + 1.92 x width))",
"reasons": [
"Preset values are the common cyclocomputer table figures."
],
"summary": "700x25c: circumference about 2105 mm (diameter 670 mm, 26.38 in).",
"verdict": "PRESET",
"degraded": false,
"diameterMm": 670.04,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"real circumference, which varies with tyre brand, pressure, load and wear (roll the wheel one turn to measure)",
"tubeless sealant or wide-rim effects on tyre profile",
"…1 more"
],
"diameterInches": 26.38,
"circumferenceMm": 2105,
"revolutionsPerKm": 475.1,
"metersPerRevolution": 2.105
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "polygon",
"mimeType": "application/json",
"resource": "https://bike-calc.x402tookit.com/wheel-size",
"description": "Rolling circumference and diameter for common tyre sizes, or an estimate from rim bead diameter and tyre width in mm.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"tyre": "700x25c"
}
},
"output": {
"asOf": "2026-10-12T01:50:57.973Z",
"basis": "preset table",
"source": "computed locally (common cyclocomputer table values; estimate = pi x (BSD + 1.92 x width))",
"reasons": [
"Preset values are the common cyclocomputer table figures."
],
"summary": "700x25c: circumference about 2105 mm (diameter 670 mm, 26.38 in).",
"verdict": "PRESET",
"degraded": false,
"diameterMm": 670.04,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"real circumference, which varies with tyre brand, pressure, load and wear (roll the wheel one turn to measure)",
"tubeless sealant or wide-rim effects on tyre profile",
"…1 more"
],
"diameterInches": 26.38,
"circumferenceMm": 2105,
"revolutionsPerKm": 475.1,
"metersPerRevolution": 2.105
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
}
],
"x402Version": 1,
"alsoAvailable": {
"llms": "https://bike-calc.x402tookit.com/llms.txt",
"catalog": "https://bike-calc.x402tookit.com/catalog",
"message": "Bicycle Gearing & Fit Calc has 8 pay-per-call endpoints (Gear ratios and speed, cadence, gear tables, chain length, wheel circumference, climb grades, saddle height and frame size.), from $0.02 a call. See the full menu and send your agents our way.",
"openapi": "https://bike-calc.x402tookit.com/openapi.json",
"related": [
{
"url": "https://bike-calc.x402tookit.com/cadence-for-speed",
"path": "/cadence-for-speed",
"what": "Cadence needed to hold a target speed in a given gear, and the chainring-to-cog ratio nee…",
"price": "$0.02"
},
{
"url": "https://bike-calc.x402tookit.com/chain-length",
"path": "/chain-length",
"what": "Chain length in links, rounded up to even, from chainstay length and chainring and cog te…",
"price": "$0.02"
},
{
"url": "https://bike-calc.x402tookit.com/climb-gradient",
"path": "/climb-gradient",
"what": "Gradient percent and angle from rise and distance, plus climbing rate (VAM) and the time…",
"price": "$0.02"
}
]
}
}Accepts
The payment requirements as published to the catalog. Read the live 402 before paying — a price here is a claim, not a quote.
Pay 0.02 USDC on Base to 0xb531…2DBDa. The signed payment is good for 5 minutes.
- Paid to
- 0xb531…2DBDa
- USD Coin contract
- 0x8335…02913
- Payment window
- 5 minutes
- As published
- 20000 smallest units
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- DUPiup…eEm8s
- Token contract
- EPjFWd…TDt1v
- Payment window
- 5 minutes
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0x3c49…c3359
- Payment window
- 5 minutes
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0xaf88…e5831
- Payment window
- 5 minutes
The catalog’s raw entry
[
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:8453",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "D6ZhtNQ5nT9ZnTHUbqXZsTx5MH2rPFiBBggX4hY1WePM"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"amount": "20000",
"scheme": "exact",
"network": "solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:137",
"maxTimeoutSeconds": 300
},
{
"asset": "0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:42161",
"maxTimeoutSeconds": 300
}
]Extensions
{
"bazaar": {
"info": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"tyre": "700x25c"
}
},
"output": {
"type": "json",
"example": {
"asOf": "2026-10-12T01:50:57.973Z",
"basis": "preset table",
"source": "computed locally (common cyclocomputer table values; estimate = pi x (BSD + 1.92 x width))",
"reasons": [
"Preset values are the common cyclocomputer table figures."
],
"summary": "700x25c: circumference about 2105 mm (diameter 670 mm, 26.38 in).",
"verdict": "PRESET",
"degraded": false,
"diameterMm": 670.04,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"real circumference, which varies with tyre brand, pressure, load and wear (roll the wheel one turn to measure)",
"tubeless sealant or wide-rim effects on tyre profile",
"…1 more"
],
"diameterInches": 26.38,
"circumferenceMm": 2105,
"revolutionsPerKm": 475.1,
"metersPerRevolution": 2.105
}
}
},
"schema": {
"type": "object",
"$schema": "https://json-schema.org/draft/2020-12/schema",
"required": [
"input"
],
"properties": {
"input": {
"type": "object",
"required": [
"type",
"method"
],
"properties": {
"type": {
"type": "string",
"const": "http"
},
"method": {
"enum": [
"GET"
],
"type": "string"
},
"queryParams": {
"type": "object",
"required": [],
"properties": {
"tyre": {
"type": "string",
"description": "A preset: 700x23c, 700x25c, 700x28c, 700x32c, 700x35c, 700x38c, 26x2.0"
},
"bsdMm": {
"type": "number",
"description": "Rim bead seat diameter in mm (622 for 700c/29er, 584 for 650b/27.5, 559 for 26 inch MTB, 406 for 20 inch BMX)"
},
"tyreWidthMm": {
"type": "number",
"description": "Tyre width in mm, with bsdMm, for an estimate"
}
}
}
},
"additionalProperties": false
},
"output": {
"type": "object",
"required": [
"type"
],
"properties": {
"type": {
"type": "string"
},
"example": {
"type": "object",
"properties": {
"asOf": {
"type": [
"null",
"string"
]
},
"basis": {
"type": [
"null",
"string"
]
},
"source": {
"type": [
"null",
"string"
]
},
"reasons": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"summary": {
"type": [
"null",
"string"
]
},
"verdict": {
"type": [
"null",
"string"
]
},
"degraded": {
"type": [
"boolean",
"null"
]
},
"diameterMm": {
"type": [
"null",
"number"
]
},
"disclaimer": {
"type": [
"null",
"string"
]
},
"notChecked": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"diameterInches": {
"type": [
"null",
"number"
]
},
"circumferenceMm": {
"type": [
"null",
"number"
]
},
"revolutionsPerKm": {
"type": [
"null",
"number"
]
},
"metersPerRevolution": {
"type": [
"null",
"number"
]
}
}
}
}
}
}
}
}
}Provenance
- Seen in the source catalog
- 2026-10-20 20:27Z
- Last indexed by Roundhouse
- 2026-10-22 19:30Z
- Last enriched (probe, favicon, geo)
- 2026-10-20 21:15Z
- x402 version
- 2
- Max timeout
- 300s
- Liveness probe
- HTTP 402
Hand this page to an agent
Copy the prompt and paste it into Claude, an MCP client or your own agent — it will vet this service and call it over the free read API. No key, no account.
GET api.roundhouseai.io/v0/endpoints
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far. Verified volume counts only settlements with an on-chain EIP-3009 marker.
Show the promptHide the prompt
Using Roundhouse, look up the x402 service Bicycle Gearing & Fit Calc and tell me whether it is worth paying: what a call costs, whether the endpoint answered when last probed, and what its payment record actually shows. curl -s 'https://api.roundhouseai.io/v0/endpoints?q=Bicycle%20Gearing%20%26%20Fit%20Calc' curl -s 'https://api.roundhouseai.io/v0/merchants/<the payTo wallet returned above>' Then call it: read the price from the live 402 at https://bike-calc.x402tookit.com/wheel-size, never from a cached figure, and pay with an x402 client. The /v0 API needs an API key (`authorization: Bearer rh_live_…`) on everything except /v0/unified* and /v0/endpoints. Either pay over x402 (mint a personal key for $0.01 at GET https://api.roundhouseai.io/v0/test/x402), or ask me for an organization key, which I create at https://roundhouseai.io/dashboard/connections. If you have neither, ask before going further. If you do not have Roundhouse tools or skills installed, read https://roundhouseai.io/skill.md first — it is the whole procedure.