Construction Calculators
Drywall sheets for a room's walls and ceiling (4x8, 4x10 or 4x12), with waste, screw count and approximate weight.
OtherLiveeip155:8453Exactvia cdp
DrywallGypsumSheetsEstimating
Calls · 30d
1
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far.
$24.31
Verified settled volume
1,175 settlements proven x402 by their on-chain EIP-3009 marker.
$0.020
Listed price
As published in the catalog. Always read the live 402 before paying.
1
Calls · 30d
Upstream's own call count for this endpoint, not ours.
1
Unique payers · 30d
Last called 2026-10-20 20:45Z
—
Upstream on-chain volume
Reported by the source catalog.
Paid to
0xb531320805C5BED1D46AEaDcF4F008FDF172DBDaThe wallet the 402 directs payment to. Its whole payment record — every payer, every chain — is on the merchant page.
Asset 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913
Provider
The payTo wallet does not resolve to a registered ERC-8004 agent. That is not a verdict on the service — most of the catalog is unregistered.
Live 402 challenge
Captured by the enrichment pass, not read just now. Prices can change — always read the 402 the endpoint answers with.
{
"error": "Payment required",
"accepts": [
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "base",
"mimeType": "application/json",
"resource": "https://construction-calc.x402tookit.com/drywall-calc",
"description": "Drywall sheets for a room's walls and ceiling (4x8, 4x10 or 4x12), with waste, screw count and approximate weight.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"doors": 1,
"widthFt": 14,
"windows": 2,
"heightFt": 8,
"lengthFt": 12,
"sheetSize": "4x8"
}
},
"output": {
"asOf": "2026-10-11T14:25:12.898Z",
"sheets": 19,
"source": "computed locally",
"reasons": [
"Walls 416 sq ft plus ceiling 168 sq ft minus 51 sq ft of openings.",
"Screws at roughly one per square foot of board (typical 12 to 16 in spacing).",
"…1 more"
],
"summary": "19 sheets of 4x8 (0.5 in) for 533 sq ft with 10% waste; about 608 screws and 973 lb of board.",
"verdict": "ESTIMATE",
"degraded": false,
"wastePct": 10,
"sheetSize": "4x8",
"wallsSqFt": 416,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"joint compound, tape and corner bead quantities",
"layout waste from awkward room shapes, soffits and angled walls",
"…3 more"
],
"ceilingSqFt": 168,
"thicknessIn": 0.5,
"openingsSqFt": 51,
"screwsApprox": 608,
"boardAreaSqFt": 533,
"sheetAreaSqFt": 32,
"weightLbApprox": 973
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "BFK9TLC3edb13K6v4YyH3DwPb5DSUpkWvb7XnqCL9b4F"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"scheme": "exact",
"network": "solana",
"mimeType": "application/json",
"resource": "https://construction-calc.x402tookit.com/drywall-calc",
"description": "Drywall sheets for a room's walls and ceiling (4x8, 4x10 or 4x12), with waste, screw count and approximate weight.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"doors": 1,
"widthFt": 14,
"windows": 2,
"heightFt": 8,
"lengthFt": 12,
"sheetSize": "4x8"
}
},
"output": {
"asOf": "2026-10-11T14:25:12.898Z",
"sheets": 19,
"source": "computed locally",
"reasons": [
"Walls 416 sq ft plus ceiling 168 sq ft minus 51 sq ft of openings.",
"Screws at roughly one per square foot of board (typical 12 to 16 in spacing).",
"…1 more"
],
"summary": "19 sheets of 4x8 (0.5 in) for 533 sq ft with 10% waste; about 608 screws and 973 lb of board.",
"verdict": "ESTIMATE",
"degraded": false,
"wastePct": 10,
"sheetSize": "4x8",
"wallsSqFt": 416,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"joint compound, tape and corner bead quantities",
"layout waste from awkward room shapes, soffits and angled walls",
"…3 more"
],
"ceilingSqFt": 168,
"thicknessIn": 0.5,
"openingsSqFt": 51,
"screwsApprox": 608,
"boardAreaSqFt": 533,
"sheetAreaSqFt": 32,
"weightLbApprox": 973
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "polygon",
"mimeType": "application/json",
"resource": "https://construction-calc.x402tookit.com/drywall-calc",
"description": "Drywall sheets for a room's walls and ceiling (4x8, 4x10 or 4x12), with waste, screw count and approximate weight.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"doors": 1,
"widthFt": 14,
"windows": 2,
"heightFt": 8,
"lengthFt": 12,
"sheetSize": "4x8"
}
},
"output": {
"asOf": "2026-10-11T14:25:12.898Z",
"sheets": 19,
"source": "computed locally",
"reasons": [
"Walls 416 sq ft plus ceiling 168 sq ft minus 51 sq ft of openings.",
"Screws at roughly one per square foot of board (typical 12 to 16 in spacing).",
"…1 more"
],
"summary": "19 sheets of 4x8 (0.5 in) for 533 sq ft with 10% waste; about 608 screws and 973 lb of board.",
"verdict": "ESTIMATE",
"degraded": false,
"wastePct": 10,
"sheetSize": "4x8",
"wallsSqFt": 416,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"joint compound, tape and corner bead quantities",
"layout waste from awkward room shapes, soffits and angled walls",
"…3 more"
],
"ceilingSqFt": 168,
"thicknessIn": 0.5,
"openingsSqFt": 51,
"screwsApprox": 608,
"boardAreaSqFt": 533,
"sheetAreaSqFt": 32,
"weightLbApprox": 973
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
}
],
"x402Version": 1,
"alsoAvailable": {
"llms": "https://construction-calc.x402tookit.com/llms.txt",
"catalog": "https://construction-calc.x402tookit.com/catalog",
"message": "Construction Calculators has 10 pay-per-call endpoints (Materials and layout maths for concrete, paint, stairs, roofs, lumber, tile, drywall, fences and decks.), from $0.02 a call. See the full menu and send your agents our way.",
"openapi": "https://construction-calc.x402tookit.com/openapi.json",
"related": [
{
"url": "https://construction-calc.x402tookit.com/fence-calc",
"path": "/fence-calc",
"what": "Posts, rails and pickets for a straight fence from its length, post spacing, picket width…",
"price": "$0.02"
},
{
"url": "https://construction-calc.x402tookit.com/paint-coverage",
"path": "/paint-coverage",
"what": "Gallons of paint for a room from its size, doors, windows and coats; optional ceiling. Ro…",
"price": "$0.02"
},
{
"url": "https://construction-calc.x402tookit.com/tile-calc",
"path": "/tile-calc",
"what": "Tiles needed for a floor or wall from area or room size, tile size, grout gap and waste,…",
"price": "$0.02"
}
]
}
}Accepts
The payment requirements as published to the catalog. Read the live 402 before paying — a price here is a claim, not a quote.
0.02USDC≈ $0.02 USD
on Base · exact scheme
Pay 0.02 USDC on Base to 0xb531…2DBDa. The signed payment is good for 5 minutes.
- Paid to
- 0xb531…2DBDa
- USD Coin contract
- 0x8335…02913
- Payment window
- 5 minutes
- As published
- 20000 smallest units
20000units
on solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- DUPiup…eEm8s
- Token contract
- EPjFWd…TDt1v
- Payment window
- 5 minutes
20000units
on Polygon · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0x3c49…c3359
- Payment window
- 5 minutes
20000units
on Arbitrum · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0xaf88…e5831
- Payment window
- 5 minutes
The catalog’s raw entry
[
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:8453",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "D6ZhtNQ5nT9ZnTHUbqXZsTx5MH2rPFiBBggX4hY1WePM"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"amount": "20000",
"scheme": "exact",
"network": "solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:137",
"maxTimeoutSeconds": 300
},
{
"asset": "0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:42161",
"maxTimeoutSeconds": 300
}
]Extensions
{
"bazaar": {
"info": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"doors": 1,
"widthFt": 14,
"windows": 2,
"heightFt": 8,
"lengthFt": 12,
"sheetSize": "4x8"
}
},
"output": {
"type": "json",
"example": {
"asOf": "2026-10-11T14:25:12.898Z",
"sheets": 19,
"source": "computed locally",
"reasons": [
"Walls 416 sq ft plus ceiling 168 sq ft minus 51 sq ft of openings.",
"Screws at roughly one per square foot of board (typical 12 to 16 in spacing).",
"…1 more"
],
"summary": "19 sheets of 4x8 (0.5 in) for 533 sq ft with 10% waste; about 608 screws and 973 lb of board.",
"verdict": "ESTIMATE",
"degraded": false,
"wastePct": 10,
"sheetSize": "4x8",
"wallsSqFt": 416,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"joint compound, tape and corner bead quantities",
"layout waste from awkward room shapes, soffits and angled walls",
"…3 more"
],
"ceilingSqFt": 168,
"thicknessIn": 0.5,
"openingsSqFt": 51,
"screwsApprox": 608,
"boardAreaSqFt": 533,
"sheetAreaSqFt": 32,
"weightLbApprox": 973
}
}
},
"schema": {
"type": "object",
"$schema": "https://json-schema.org/draft/2020-12/schema",
"required": [
"input"
],
"properties": {
"input": {
"type": "object",
"required": [
"type",
"method"
],
"properties": {
"type": {
"type": "string",
"const": "http"
},
"method": {
"enum": [
"GET"
],
"type": "string"
},
"queryParams": {
"type": "object",
"required": [
"lengthFt",
"widthFt",
"heightFt"
],
"properties": {
"doors": {
"type": "integer",
"description": "Doors to subtract (21 sq ft each), default 0"
},
"widthFt": {
"type": "number",
"description": "Room width in feet"
},
"windows": {
"type": "integer",
"description": "Windows to subtract (15 sq ft each), default 0"
},
"heightFt": {
"type": "number",
"description": "Ceiling height in feet"
},
"lengthFt": {
"type": "number",
"description": "Room length in feet"
},
"wastePct": {
"type": "number",
"description": "Waste, default 10"
},
"sheetSize": {
"type": "string",
"description": "4x8 (default), 4x10 or 4x12"
},
"thicknessIn": {
"type": "number",
"description": "0.5 (default) or 0.625"
},
"includeCeiling": {
"type": "string",
"description": "yes (default) or no"
}
}
}
},
"additionalProperties": false
},
"output": {
"type": "object",
"required": [
"type"
],
"properties": {
"type": {
"type": "string"
},
"example": {
"type": "object",
"properties": {
"asOf": {
"type": [
"null",
"string"
]
},
"sheets": {
"type": [
"null",
"number"
]
},
"source": {
"type": [
"null",
"string"
]
},
"reasons": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"summary": {
"type": [
"null",
"string"
]
},
"verdict": {
"type": [
"null",
"string"
]
},
"degraded": {
"type": [
"boolean",
"null"
]
},
"wastePct": {
"type": [
"null",
"number"
]
},
"sheetSize": {
"type": [
"null",
"string"
]
},
"wallsSqFt": {
"type": [
"null",
"number"
]
},
"disclaimer": {
"type": [
"null",
"string"
]
},
"notChecked": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"ceilingSqFt": {
"type": [
"null",
"number"
]
},
"thicknessIn": {
"type": [
"null",
"number"
]
},
"openingsSqFt": {
"type": [
"null",
"number"
]
},
"screwsApprox": {
"type": [
"null",
"number"
]
},
"boardAreaSqFt": {
"type": [
"null",
"number"
]
},
"sheetAreaSqFt": {
"type": [
"null",
"number"
]
},
"weightLbApprox": {
"type": [
"null",
"number"
]
}
}
}
}
}
}
}
}
}Provenance
- Seen in the source catalog
- 2026-10-20 20:45Z
- Last indexed by Roundhouse
- 2026-10-22 06:50Z
- Last enriched (probe, favicon, geo)
- 2026-10-20 22:45Z
- x402 version
- 2
- Max timeout
- 300s
- Liveness probe
- HTTP 402
Hand this page to an agent
Copy the prompt and paste it into Claude, an MCP client or your own agent — it will vet this service and call it over the free read API. No key, no account.
GET api.roundhouseai.io/v0/endpoints
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far. Verified volume counts only settlements with an on-chain EIP-3009 marker.
Show the promptHide the prompt
Using Roundhouse, look up the x402 service Construction Calculators and tell me whether it is worth paying: what a call costs, whether the endpoint answered when last probed, and what its payment record actually shows. curl -s 'https://api.roundhouseai.io/v0/endpoints?q=Construction%20Calculators' curl -s 'https://api.roundhouseai.io/v0/merchants/<the payTo wallet returned above>' Then call it: read the price from the live 402 at https://construction-calc.x402tookit.com/drywall-calc, never from a cached figure, and pay with an x402 client. The /v0 API needs an API key (`authorization: Bearer rh_live_…`) on everything except /v0/unified* and /v0/endpoints. Either pay over x402 (mint a personal key for $0.01 at GET https://api.roundhouseai.io/v0/test/x402), or ask me for an organization key, which I create at https://roundhouseai.io/dashboard/connections. If you have neither, ask before going further. If you do not have Roundhouse tools or skills installed, read https://roundhouseai.io/skill.md first — it is the whole procedure.