Craft & Maker Calc
Resin needed to fill a rectangular or round mold: volume in ml and oz, waste allowance and parts A and B by mix ratio.
OtherLiveeip155:8453Exactvia cdp
ResinEpoxyMoldVolume
Calls · 30d
1
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far.
$24.31
Verified settled volume
1,175 settlements proven x402 by their on-chain EIP-3009 marker.
$0.020
Listed price
As published in the catalog. Always read the live 402 before paying.
1
Calls · 30d
Upstream's own call count for this endpoint, not ours.
1
Unique payers · 30d
Last called 2026-10-20 20:28Z
—
Upstream on-chain volume
Reported by the source catalog.
Paid to
0xb531320805C5BED1D46AEaDcF4F008FDF172DBDaThe wallet the 402 directs payment to. Its whole payment record — every payer, every chain — is on the merchant page.
Asset 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913
Provider
The payTo wallet does not resolve to a registered ERC-8004 agent. That is not a verdict on the service — most of the catalog is unregistered.
Live 402 challenge
Captured by the enrichment pass, not read just now. Prices can change — always read the 402 the endpoint answers with.
{
"error": "Payment required",
"accepts": [
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "base",
"mimeType": "application/json",
"resource": "https://craft-calc.x402tookit.com/resin-volume",
"description": "Resin needed to fill a rectangular or round mold: volume in ml and oz, waste allowance and parts A and B by mix ratio.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"unit": "in",
"depth": 0.25,
"shape": "rectangle",
"width": 4,
"lengthOrDiameter": 4
}
},
"output": {
"asOf": "2026-10-12T01:13:48.368Z",
"unit": "in",
"mixMl": 72.1,
"shape": "rectangle",
"source": "computed locally (geometry; 1 cubic inch = 16.387064 ml)",
"mixFlOz": 2.438,
"partAMl": 36.05,
"partBMl": 36.05,
"reasons": [
"Mix by VOLUME only if your brand's ratio is by volume; some are by weight."
],
"summary": "65.5 ml (2.22 fl oz) fills the mold; mix 72.1 ml with 10% waste: 36.1 ml resin + 36.1 ml hardener (1:1).",
"verdict": "COMPUTED",
"degraded": false,
"mixRatio": "1:1",
"volumeMl": 65.55,
"partAFlOz": 1.219,
"partBFlOz": 1.219,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"your resin brand's pour-depth limit per layer, cure time and exotherm (deep pours can overheat)",
"inserts, embeds and mold curvature that displace resin",
"…1 more"
],
"volumeFlOz": 2.216,
"volumeCubic": 4,
"wastePercent": 10
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "BFK9TLC3edb13K6v4YyH3DwPb5DSUpkWvb7XnqCL9b4F"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"scheme": "exact",
"network": "solana",
"mimeType": "application/json",
"resource": "https://craft-calc.x402tookit.com/resin-volume",
"description": "Resin needed to fill a rectangular or round mold: volume in ml and oz, waste allowance and parts A and B by mix ratio.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"unit": "in",
"depth": 0.25,
"shape": "rectangle",
"width": 4,
"lengthOrDiameter": 4
}
},
"output": {
"asOf": "2026-10-12T01:13:48.368Z",
"unit": "in",
"mixMl": 72.1,
"shape": "rectangle",
"source": "computed locally (geometry; 1 cubic inch = 16.387064 ml)",
"mixFlOz": 2.438,
"partAMl": 36.05,
"partBMl": 36.05,
"reasons": [
"Mix by VOLUME only if your brand's ratio is by volume; some are by weight."
],
"summary": "65.5 ml (2.22 fl oz) fills the mold; mix 72.1 ml with 10% waste: 36.1 ml resin + 36.1 ml hardener (1:1).",
"verdict": "COMPUTED",
"degraded": false,
"mixRatio": "1:1",
"volumeMl": 65.55,
"partAFlOz": 1.219,
"partBFlOz": 1.219,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"your resin brand's pour-depth limit per layer, cure time and exotherm (deep pours can overheat)",
"inserts, embeds and mold curvature that displace resin",
"…1 more"
],
"volumeFlOz": 2.216,
"volumeCubic": 4,
"wastePercent": 10
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "polygon",
"mimeType": "application/json",
"resource": "https://craft-calc.x402tookit.com/resin-volume",
"description": "Resin needed to fill a rectangular or round mold: volume in ml and oz, waste allowance and parts A and B by mix ratio.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"unit": "in",
"depth": 0.25,
"shape": "rectangle",
"width": 4,
"lengthOrDiameter": 4
}
},
"output": {
"asOf": "2026-10-12T01:13:48.368Z",
"unit": "in",
"mixMl": 72.1,
"shape": "rectangle",
"source": "computed locally (geometry; 1 cubic inch = 16.387064 ml)",
"mixFlOz": 2.438,
"partAMl": 36.05,
"partBMl": 36.05,
"reasons": [
"Mix by VOLUME only if your brand's ratio is by volume; some are by weight."
],
"summary": "65.5 ml (2.22 fl oz) fills the mold; mix 72.1 ml with 10% waste: 36.1 ml resin + 36.1 ml hardener (1:1).",
"verdict": "COMPUTED",
"degraded": false,
"mixRatio": "1:1",
"volumeMl": 65.55,
"partAFlOz": 1.219,
"partBFlOz": 1.219,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"your resin brand's pour-depth limit per layer, cure time and exotherm (deep pours can overheat)",
"inserts, embeds and mold curvature that displace resin",
"…1 more"
],
"volumeFlOz": 2.216,
"volumeCubic": 4,
"wastePercent": 10
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
}
],
"x402Version": 1,
"alsoAvailable": {
"llms": "https://craft-calc.x402tookit.com/llms.txt",
"catalog": "https://craft-calc.x402tookit.com/catalog",
"message": "Craft & Maker Calc has 8 pay-per-call endpoints (Cross-stitch size, quilt binding, knitting gauge, half-square triangles, candle wax, resin volume, stitch counts and decal scaling.), from $0.02 a call. See the full menu and send your agents our way.",
"openapi": "https://craft-calc.x402tookit.com/openapi.json",
"related": [
{
"url": "https://craft-calc.x402tookit.com/stitch-count-area",
"path": "/stitch-count-area",
"what": "Stitches and rows needed to cover a width and height at your stitch and row gauge, with t…",
"price": "$0.02"
},
{
"url": "https://craft-calc.x402tookit.com/candle-wax",
"path": "/candle-wax",
"what": "Wax and fragrance oil weights for container candles from jar size, fill level, wax densit…",
"price": "$0.02"
},
{
"url": "https://craft-calc.x402tookit.com/cross-stitch-size",
"path": "/cross-stitch-size",
"what": "Finished size of a cross-stitch design and the fabric to cut, from stitches wide/high, fa…",
"price": "$0.02"
}
]
}
}Accepts
The payment requirements as published to the catalog. Read the live 402 before paying — a price here is a claim, not a quote.
0.02USDC≈ $0.02 USD
on Base · exact scheme
Pay 0.02 USDC on Base to 0xb531…2DBDa. The signed payment is good for 5 minutes.
- Paid to
- 0xb531…2DBDa
- USD Coin contract
- 0x8335…02913
- Payment window
- 5 minutes
- As published
- 20000 smallest units
20000units
on solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- DUPiup…eEm8s
- Token contract
- EPjFWd…TDt1v
- Payment window
- 5 minutes
20000units
on Polygon · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0x3c49…c3359
- Payment window
- 5 minutes
20000units
on Arbitrum · exact scheme
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0xaf88…e5831
- Payment window
- 5 minutes
The catalog’s raw entry
[
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:8453",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "D6ZhtNQ5nT9ZnTHUbqXZsTx5MH2rPFiBBggX4hY1WePM"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"amount": "20000",
"scheme": "exact",
"network": "solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:137",
"maxTimeoutSeconds": 300
},
{
"asset": "0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:42161",
"maxTimeoutSeconds": 300
}
]Extensions
{
"bazaar": {
"info": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"unit": "in",
"depth": 0.25,
"shape": "rectangle",
"width": 4,
"lengthOrDiameter": 4
}
},
"output": {
"type": "json",
"example": {
"asOf": "2026-10-12T01:13:48.368Z",
"unit": "in",
"mixMl": 72.1,
"shape": "rectangle",
"source": "computed locally (geometry; 1 cubic inch = 16.387064 ml)",
"mixFlOz": 2.438,
"partAMl": 36.05,
"partBMl": 36.05,
"reasons": [
"Mix by VOLUME only if your brand's ratio is by volume; some are by weight."
],
"summary": "65.5 ml (2.22 fl oz) fills the mold; mix 72.1 ml with 10% waste: 36.1 ml resin + 36.1 ml hardener (1:1).",
"verdict": "COMPUTED",
"degraded": false,
"mixRatio": "1:1",
"volumeMl": 65.55,
"partAFlOz": 1.219,
"partBFlOz": 1.219,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"your resin brand's pour-depth limit per layer, cure time and exotherm (deep pours can overheat)",
"inserts, embeds and mold curvature that displace resin",
"…1 more"
],
"volumeFlOz": 2.216,
"volumeCubic": 4,
"wastePercent": 10
}
}
},
"schema": {
"type": "object",
"$schema": "https://json-schema.org/draft/2020-12/schema",
"required": [
"input"
],
"properties": {
"input": {
"type": "object",
"required": [
"type",
"method"
],
"properties": {
"type": {
"type": "string",
"const": "http"
},
"method": {
"enum": [
"GET"
],
"type": "string"
},
"queryParams": {
"type": "object",
"required": [
"shape",
"lengthOrDiameter",
"depth"
],
"properties": {
"unit": {
"type": "string",
"description": "in (default) or cm"
},
"depth": {
"type": "number",
"description": "Fill depth or height"
},
"shape": {
"type": "string",
"description": "rectangle or cylinder (a round coaster or coin mold)"
},
"width": {
"type": "number",
"description": "Width, for a rectangle"
},
"mixRatio": {
"type": "string",
"description": "Resin to hardener by volume: 1:1 (default), 2:1 or 3:1"
},
"wastePercent": {
"type": "number",
"description": "Extra to mix for cup and stir losses (default 10)"
},
"lengthOrDiameter": {
"type": "number",
"description": "Length (rectangle) or diameter (cylinder)"
}
}
}
},
"additionalProperties": false
},
"output": {
"type": "object",
"required": [
"type"
],
"properties": {
"type": {
"type": "string"
},
"example": {
"type": "object",
"properties": {
"asOf": {
"type": [
"null",
"string"
]
},
"unit": {
"type": [
"null",
"string"
]
},
"mixMl": {
"type": [
"null",
"number"
]
},
"shape": {
"type": [
"null",
"string"
]
},
"source": {
"type": [
"null",
"string"
]
},
"mixFlOz": {
"type": [
"null",
"number"
]
},
"partAMl": {
"type": [
"null",
"number"
]
},
"partBMl": {
"type": [
"null",
"number"
]
},
"reasons": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"summary": {
"type": [
"null",
"string"
]
},
"verdict": {
"type": [
"null",
"string"
]
},
"degraded": {
"type": [
"boolean",
"null"
]
},
"mixRatio": {
"type": [
"null",
"string"
]
},
"volumeMl": {
"type": [
"null",
"number"
]
},
"partAFlOz": {
"type": [
"null",
"number"
]
},
"partBFlOz": {
"type": [
"null",
"number"
]
},
"disclaimer": {
"type": [
"null",
"string"
]
},
"notChecked": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"volumeFlOz": {
"type": [
"null",
"number"
]
},
"volumeCubic": {
"type": [
"null",
"number"
]
},
"wastePercent": {
"type": [
"null",
"number"
]
}
}
}
}
}
}
}
}
}Provenance
- Seen in the source catalog
- 2026-10-20 20:28Z
- Last indexed by Roundhouse
- 2026-10-22 19:30Z
- Last enriched (probe, favicon, geo)
- 2026-10-20 21:15Z
- x402 version
- 2
- Max timeout
- 300s
- Liveness probe
- HTTP 402
Hand this page to an agent
Copy the prompt and paste it into Claude, an MCP client or your own agent — it will vet this service and call it over the free read API. No key, no account.
GET api.roundhouseai.io/v0/endpoints
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far. Verified volume counts only settlements with an on-chain EIP-3009 marker.
Show the promptHide the prompt
Using Roundhouse, look up the x402 service Craft & Maker Calc and tell me whether it is worth paying: what a call costs, whether the endpoint answered when last probed, and what its payment record actually shows. curl -s 'https://api.roundhouseai.io/v0/endpoints?q=Craft%20%26%20Maker%20Calc' curl -s 'https://api.roundhouseai.io/v0/merchants/<the payTo wallet returned above>' Then call it: read the price from the live 402 at https://craft-calc.x402tookit.com/resin-volume, never from a cached figure, and pay with an x402 client. The /v0 API needs an API key (`authorization: Bearer rh_live_…`) on everything except /v0/unified* and /v0/endpoints. Either pay over x402 (mint a personal key for $0.01 at GET https://api.roundhouseai.io/v0/test/x402), or ask me for an organization key, which I create at https://roundhouseai.io/dashboard/connections. If you have neither, ask before going further. If you do not have Roundhouse tools or skills installed, read https://roundhouseai.io/skill.md first — it is the whole procedure.