Garden Calculators
Plants that fit a bed at a spacing (grid or offset rows) and seeds to sow from germination rate, per bed and per square foot.
The wallet the 402 directs payment to. Its whole payment record — every payer, every chain — is on the merchant page.
Asset 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913
The payTo wallet does not resolve to a registered ERC-8004 agent. That is not a verdict on the service — most of the catalog is unregistered.
Live 402 challenge
Captured by the enrichment pass, not read just now. Prices can change — always read the 402 the endpoint answers with.
{
"error": "Payment required",
"accepts": [
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "base",
"mimeType": "application/json",
"resource": "https://garden-calc.x402tookit.com/plant-spacing",
"description": "Plants that fit a bed at a spacing (grid or offset rows) and seeds to sow from germination rate, per bed and per square foot.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"widthFt": 4,
"lengthFt": 8,
"spacingIn": 6,
"germinationPercent": 80
}
},
"output": {
"asOf": "2026-10-11T20:20:03.525Z",
"layout": "grid",
"source": "computed locally",
"reasons": [
"Grid count = floor(length / spacing) x floor(width / row spacing), leaving half a spacing at each edge; the area method divides area by the footprint of one plant.",
"Offset rows pack plants about 15% denser than a square grid at the same in-row spacing."
],
"summary": "32 sq ft at 6 x 6 in (grid) holds 128 plants (4 per sq ft). With 80% germination, sowing 160 seeds (one per spot) should fill them; sowing 1 per spot uses 128 seeds.",
"verdict": "COMPUTED",
"areaSqFt": 32,
"degraded": false,
"spacingIn": 6,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"the right spacing for the crop and variety: use the seed packet or extension guide (this calculator does not know what the plant needs)",
"paths, edges and trellises that remove planting area",
"…2 more"
],
"rowsFitting": 8,
"plantsPerRow": 16,
"rowSpacingIn": 6,
"seedsPerHole": 1,
"plantsPerSqFt": 4,
"plantsEstimate": 128,
"germinationPercent": 80,
"plantsByAreaDivision": 128,
"seedsToSowAtThatRate": 128,
"squareFootGardeningNote": "4 plants per square foot (square-foot gardening uses 1, 4, 9 or 16)",
"plantsByRowAndPlantCount": 128,
"expectedSeedlingsFromSowing": 102.4,
"seedsNeededOnePerSpotToFill": 160,
"expectedFillPercentOnePerHole": 80
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "BFK9TLC3edb13K6v4YyH3DwPb5DSUpkWvb7XnqCL9b4F"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"scheme": "exact",
"network": "solana",
"mimeType": "application/json",
"resource": "https://garden-calc.x402tookit.com/plant-spacing",
"description": "Plants that fit a bed at a spacing (grid or offset rows) and seeds to sow from germination rate, per bed and per square foot.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"widthFt": 4,
"lengthFt": 8,
"spacingIn": 6,
"germinationPercent": 80
}
},
"output": {
"asOf": "2026-10-11T20:20:03.525Z",
"layout": "grid",
"source": "computed locally",
"reasons": [
"Grid count = floor(length / spacing) x floor(width / row spacing), leaving half a spacing at each edge; the area method divides area by the footprint of one plant.",
"Offset rows pack plants about 15% denser than a square grid at the same in-row spacing."
],
"summary": "32 sq ft at 6 x 6 in (grid) holds 128 plants (4 per sq ft). With 80% germination, sowing 160 seeds (one per spot) should fill them; sowing 1 per spot uses 128 seeds.",
"verdict": "COMPUTED",
"areaSqFt": 32,
"degraded": false,
"spacingIn": 6,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"the right spacing for the crop and variety: use the seed packet or extension guide (this calculator does not know what the plant needs)",
"paths, edges and trellises that remove planting area",
"…2 more"
],
"rowsFitting": 8,
"plantsPerRow": 16,
"rowSpacingIn": 6,
"seedsPerHole": 1,
"plantsPerSqFt": 4,
"plantsEstimate": 128,
"germinationPercent": 80,
"plantsByAreaDivision": 128,
"seedsToSowAtThatRate": 128,
"squareFootGardeningNote": "4 plants per square foot (square-foot gardening uses 1, 4, 9 or 16)",
"plantsByRowAndPlantCount": 128,
"expectedSeedlingsFromSowing": 102.4,
"seedsNeededOnePerSpotToFill": 160,
"expectedFillPercentOnePerHole": 80
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"scheme": "exact",
"network": "polygon",
"mimeType": "application/json",
"resource": "https://garden-calc.x402tookit.com/plant-spacing",
"description": "Plants that fit a bed at a spacing (grid or offset rows) and seeds to sow from germination rate, per bed and per square foot.",
"outputSchema": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"widthFt": 4,
"lengthFt": 8,
"spacingIn": 6,
"germinationPercent": 80
}
},
"output": {
"asOf": "2026-10-11T20:20:03.525Z",
"layout": "grid",
"source": "computed locally",
"reasons": [
"Grid count = floor(length / spacing) x floor(width / row spacing), leaving half a spacing at each edge; the area method divides area by the footprint of one plant.",
"Offset rows pack plants about 15% denser than a square grid at the same in-row spacing."
],
"summary": "32 sq ft at 6 x 6 in (grid) holds 128 plants (4 per sq ft). With 80% germination, sowing 160 seeds (one per spot) should fill them; sowing 1 per spot uses 128 seeds.",
"verdict": "COMPUTED",
"areaSqFt": 32,
"degraded": false,
"spacingIn": 6,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"the right spacing for the crop and variety: use the seed packet or extension guide (this calculator does not know what the plant needs)",
"paths, edges and trellises that remove planting area",
"…2 more"
],
"rowsFitting": 8,
"plantsPerRow": 16,
"rowSpacingIn": 6,
"seedsPerHole": 1,
"plantsPerSqFt": 4,
"plantsEstimate": 128,
"germinationPercent": 80,
"plantsByAreaDivision": 128,
"seedsToSowAtThatRate": 128,
"squareFootGardeningNote": "4 plants per square foot (square-foot gardening uses 1, 4, 9 or 16)",
"plantsByRowAndPlantCount": 128,
"expectedSeedlingsFromSowing": 102.4,
"seedsNeededOnePerSpotToFill": 160,
"expectedFillPercentOnePerHole": 80
}
},
"maxAmountRequired": "20000",
"maxTimeoutSeconds": 300
}
],
"x402Version": 1,
"alsoAvailable": {
"llms": "https://garden-calc.x402tookit.com/llms.txt",
"catalog": "https://garden-calc.x402tookit.com/catalog",
"message": "Garden Calculators has 8 pay-per-call endpoints (Garden math for agents: growing degree days, plant spacing, bed soil, drip irrigation, fertilizer, compost balance, frost risk and planting dates.), from $0.02 a call. See the full menu and send your agents our way.",
"openapi": "https://garden-calc.x402tookit.com/openapi.json",
"related": [
{
"url": "https://garden-calc.x402tookit.com/planting-dates",
"path": "/planting-dates",
"what": "Planting calendar from your frost date: dates for tasks given as weeks before or after, s…",
"price": "$0.02"
},
{
"url": "https://garden-calc.x402tookit.com/frost-risk",
"path": "/frost-risk",
"what": "Frost or freeze class of a forecast low against plant hardiness, plus where a date sits a…",
"price": "$0.02"
},
{
"url": "https://garden-calc.x402tookit.com/soil-volume",
"path": "/soil-volume",
"what": "Soil or mulch for a rectangular or round bed: cubic feet, yards, litres, bags, settling a…",
"price": "$0.02"
}
]
}
}Accepts
The payment requirements as published to the catalog. Read the live 402 before paying — a price here is a claim, not a quote.
Pay 0.02 USDC on Base to 0xb531…2DBDa. The signed payment is good for 5 minutes.
- Paid to
- 0xb531…2DBDa
- USD Coin contract
- 0x8335…02913
- Payment window
- 5 minutes
- As published
- 20000 smallest units
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- DUPiup…eEm8s
- Token contract
- EPjFWd…TDt1v
- Payment window
- 5 minutes
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0x3c49…c3359
- Payment window
- 5 minutes
That figure is in the token’s smallest units. Roundhouse does not hold this contract’s decimals, so it is shown as published rather than converted.
- Paid to
- 0xb531…2DBDa
- Token contract
- 0xaf88…e5831
- Payment window
- 5 minutes
The catalog’s raw entry
[
{
"asset": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:8453",
"maxTimeoutSeconds": 300
},
{
"asset": "EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v",
"extra": {
"feePayer": "D6ZhtNQ5nT9ZnTHUbqXZsTx5MH2rPFiBBggX4hY1WePM"
},
"payTo": "DUPiupXtuox38dcGoXUKer5mAydCzmaHjrbQ66qeEm8s",
"amount": "20000",
"scheme": "exact",
"network": "solana:5eykt4UsFv8P8NJdTREpY1vzqKqZKvdp",
"maxTimeoutSeconds": 300
},
{
"asset": "0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:137",
"maxTimeoutSeconds": 300
},
{
"asset": "0xaf88d065e77c8cC2239327C5EDb3A432268e5831",
"extra": {
"name": "USD Coin",
"version": "2"
},
"payTo": "0xb531320805C5BED1D46AEaDcF4F008FDF172DBDa",
"amount": "20000",
"scheme": "exact",
"network": "eip155:42161",
"maxTimeoutSeconds": 300
}
]Extensions
{
"bazaar": {
"info": {
"input": {
"type": "http",
"method": "GET",
"queryParams": {
"widthFt": 4,
"lengthFt": 8,
"spacingIn": 6,
"germinationPercent": 80
}
},
"output": {
"type": "json",
"example": {
"asOf": "2026-10-11T20:20:03.525Z",
"layout": "grid",
"source": "computed locally",
"reasons": [
"Grid count = floor(length / spacing) x floor(width / row spacing), leaving half a spacing at each edge; the area method divides area by the footprint of one plant.",
"Offset rows pack plants about 15% denser than a square grid at the same in-row spacing."
],
"summary": "32 sq ft at 6 x 6 in (grid) holds 128 plants (4 per sq ft). With 80% germination, sowing 160 seeds (one per spot) should fill them; sowing 1 per spot uses 128 seeds.",
"verdict": "COMPUTED",
"areaSqFt": 32,
"degraded": false,
"spacingIn": 6,
"disclaimer": "Screening signal computed from the named public source. Not financial, legal or investment advice; provided as is. Verify at the source before acting.",
"notChecked": [
"the right spacing for the crop and variety: use the seed packet or extension guide (this calculator does not know what the plant needs)",
"paths, edges and trellises that remove planting area",
"…2 more"
],
"rowsFitting": 8,
"plantsPerRow": 16,
"rowSpacingIn": 6,
"seedsPerHole": 1,
"plantsPerSqFt": 4,
"plantsEstimate": 128,
"germinationPercent": 80,
"plantsByAreaDivision": 128,
"seedsToSowAtThatRate": 128,
"squareFootGardeningNote": "4 plants per square foot (square-foot gardening uses 1, 4, 9 or 16)",
"plantsByRowAndPlantCount": 128,
"expectedSeedlingsFromSowing": 102.4,
"seedsNeededOnePerSpotToFill": 160,
"expectedFillPercentOnePerHole": 80
}
}
},
"schema": {
"type": "object",
"$schema": "https://json-schema.org/draft/2020-12/schema",
"required": [
"input"
],
"properties": {
"input": {
"type": "object",
"required": [
"type",
"method"
],
"properties": {
"type": {
"type": "string",
"const": "http"
},
"method": {
"enum": [
"GET"
],
"type": "string"
},
"queryParams": {
"type": "object",
"required": [
"spacingIn"
],
"properties": {
"layout": {
"type": "string",
"description": "grid (default) or offset (triangular, rows staggered; row distance is 0.866 x spacing)"
},
"widthFt": {
"type": "number",
"description": "Bed width in feet"
},
"areaSqFt": {
"type": "number",
"description": "Or the planted area in square feet"
},
"lengthFt": {
"type": "number",
"description": "Bed length in feet (with widthFt), or give areaSqFt"
},
"spacingIn": {
"type": "number",
"description": "Spacing between plants in a row, inches, 1 to 120"
},
"rowSpacingIn": {
"type": "number",
"description": "Distance between rows in inches (default: same as spacingIn)"
},
"seedsPerHole": {
"type": "integer",
"description": "Seeds sown per planting spot, 1 to 6 (default 1)"
},
"germinationPercent": {
"type": "number",
"description": "Seed germination rate, 10 to 100 (default 85)"
}
}
}
},
"additionalProperties": false
},
"output": {
"type": "object",
"required": [
"type"
],
"properties": {
"type": {
"type": "string"
},
"example": {
"type": "object",
"properties": {
"asOf": {
"type": [
"null",
"string"
]
},
"layout": {
"type": [
"null",
"string"
]
},
"source": {
"type": [
"null",
"string"
]
},
"reasons": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"summary": {
"type": [
"null",
"string"
]
},
"verdict": {
"type": [
"null",
"string"
]
},
"areaSqFt": {
"type": [
"null",
"number"
]
},
"degraded": {
"type": [
"boolean",
"null"
]
},
"spacingIn": {
"type": [
"null",
"number"
]
},
"disclaimer": {
"type": [
"null",
"string"
]
},
"notChecked": {
"type": [
"array",
"null"
],
"items": {
"type": "string"
}
},
"rowsFitting": {
"type": [
"null",
"number"
]
},
"plantsPerRow": {
"type": [
"null",
"number"
]
},
"rowSpacingIn": {
"type": [
"null",
"number"
]
},
"seedsPerHole": {
"type": [
"null",
"number"
]
},
"plantsPerSqFt": {
"type": [
"null",
"number"
]
},
"plantsEstimate": {
"type": [
"null",
"number"
]
},
"germinationPercent": {
"type": [
"null",
"number"
]
},
"plantsByAreaDivision": {
"type": [
"null",
"number"
]
},
"seedsToSowAtThatRate": {
"type": [
"null",
"number"
]
},
"squareFootGardeningNote": {
"type": [
"null",
"string"
]
},
"plantsByRowAndPlantCount": {
"type": [
"null",
"number"
]
},
"expectedSeedlingsFromSowing": {
"type": [
"null",
"number"
]
},
"seedsNeededOnePerSpotToFill": {
"type": [
"null",
"number"
]
},
"expectedFillPercentOnePerHole": {
"type": [
"null",
"number"
]
}
}
}
}
}
}
}
}
}Provenance
- Seen in the source catalog
- 2026-10-20 20:28Z
- Last indexed by Roundhouse
- 2026-10-22 19:30Z
- Last enriched (probe, favicon, geo)
- 2026-10-20 21:15Z
- x402 version
- 2
- Max timeout
- 300s
- Liveness probe
- HTTP 402
Hand this page to an agent
Copy the prompt and paste it into Claude, an MCP client or your own agent — it will vet this service and call it over the free read API. No key, no account.
GET api.roundhouseai.io/v0/endpoints
This endpoint's own trailing-30-day call count, as published by the upstream catalog and snapshotted daily. 4 snapshots so far. Verified volume counts only settlements with an on-chain EIP-3009 marker.
Show the promptHide the prompt
Using Roundhouse, look up the x402 service Garden Calculators and tell me whether it is worth paying: what a call costs, whether the endpoint answered when last probed, and what its payment record actually shows. curl -s 'https://api.roundhouseai.io/v0/endpoints?q=Garden%20Calculators' curl -s 'https://api.roundhouseai.io/v0/merchants/<the payTo wallet returned above>' Then call it: read the price from the live 402 at https://garden-calc.x402tookit.com/plant-spacing, never from a cached figure, and pay with an x402 client. The /v0 API needs an API key (`authorization: Bearer rh_live_…`) on everything except /v0/unified* and /v0/endpoints. Either pay over x402 (mint a personal key for $0.01 at GET https://api.roundhouseai.io/v0/test/x402), or ask me for an organization key, which I create at https://roundhouseai.io/dashboard/connections. If you have neither, ask before going further. If you do not have Roundhouse tools or skills installed, read https://roundhouseai.io/skill.md first — it is the whole procedure.